Difference between revisions of "Hardware"
From Snowcap
| Line 23: | Line 23: | ||
* [[Solar Harvester v1]] (Completed) |
* [[Solar Harvester v1]] (Completed) |
||
* [[SPIRIT1 Board v1]] (Completed) |
* [[SPIRIT1 Board v1]] (Completed) |
||
| − | * [[SPSGRF Board v1]] ( |
+ | * [[SPSGRF Board v1]] (Completed) |
* [[USB Serial Board v1]] (In design) |
* [[USB Serial Board v1]] (In design) |
||
Revision as of 18:20, 30 July 2017
This page will contain the list of our devices.
WARNING: These are implemented mostly by software engineers and they may be missing recommended safety features and may not work properly even if they seem to be doing so on a first look. So do make your own checks before replicating anything.
- Base Board v1 (Completed)
- Control Board v1 (Completed)
Control Board v2(Replaced, see Base Boards and MCU Boards)Energy Harvester v1(Broken design, see Solar Harvester)- LSM9DS0 Board v1 (Completed)
- MCU Board STM32F4 v1 (Completed)
Nixie duo v1(Replaced by Nixie combo)Nixie driver v1(Replaced by Nixie combo)- Nixie combo v1 (In design, not big enough clearances)
- Nixie power v1 (In design, not big enough clearances)
- PWM Board v1 (Completed)
- Radio Board v1 (Completed)
- Radio Board v2 (Completed)
- Radio Board v3 (Completed)
- Radio Debug Board v1 (Completed)
- Si7021 Board v1 (Completed)
- Soil Moisture Sensor v1 (Completed)
- Solar Harvester v1 (Completed)
- SPIRIT1 Board v1 (Completed)
- SPSGRF Board v1 (Completed)
- USB Serial Board v1 (In design)
