Difference between revisions of "Hardware"
From Snowcap
(RBv3 complete) |
(Add Si7021 board) |
||
| Line 17: | Line 17: | ||
* [[Radio Board v1]] (Completed) |
* [[Radio Board v1]] (Completed) |
||
* [[Radio Board v2]] (Completed) |
* [[Radio Board v2]] (Completed) |
||
| − | * [[Radio Board v3]] (Completed |
+ | * [[Radio Board v3]] (Completed) |
* [[Radio Debug Board v1]] (Completed) |
* [[Radio Debug Board v1]] (Completed) |
||
| + | * [[Si7021 Board v1]] (In design) |
||
* [[Soil Moisture Sensor v1]] (Completed) |
* [[Soil Moisture Sensor v1]] (Completed) |
||
* [[Solar Harvester v1]] (Completed) |
* [[Solar Harvester v1]] (Completed) |
||
Revision as of 15:48, 25 October 2015
This page will contain the list of our devices.
WARNING: These are implemented mostly by software engineers and they may be missing recommended safety features and may not work properly even if they seem to be doing so on a first look. So do make your own checks before replicating anything.
- Base Board v1 (Completed)
- Control Board v1 (Completed)
Control Board v2(Replaced, see Base Boards and MCU Boards)Energy Harvester v1(Broken design, see Solar Harvester)- LSM9DS0 Board v1 (Completed)
- MCU Board STM32F4 v1 (Completed)
Nixie duo v1(Replaced by Nixie combo)Nixie driver v1(Replaced by Nixie combo)- Nixie combo v1 (In design, not big enough clearances)
- Nixie power v1 (In design, not big enough clearances)
- PWM Board v1 (Completed)
- Radio Board v1 (Completed)
- Radio Board v2 (Completed)
- Radio Board v3 (Completed)
- Radio Debug Board v1 (Completed)
- Si7021 Board v1 (In design)
- Soil Moisture Sensor v1 (Completed)
- Solar Harvester v1 (Completed)
- USB Serial Board v1 (In design)
