Nixie combo v1
From Snowcap
Status: Broken, dangerous
Not large enough clearances for the high voltage.
Introduction
This project is a combination of the Ogi Lumen Nixie driver board and Ogi Lumen Nixie duo board.
Design
BOM
| Ref | Value | Digikey ref | Mouser ref |
|---|---|---|---|
| C1, C4 | FCA0805C104M-J2 | 338-2772-1-ND | - |
| C2, C3 | CAP ALUM 100UF 16V 20% SMD | 399-6669-1-ND | - |
| P1, P2 | pin 0.1" header | - | - |
| R1,R2, R3,R4 | RES 47K OHM 1W 5% 2512 SMD | RHM47KBCCT-ND | - |
| U1, U2, U3, U4 | K155ID1 | - | - |
| U5, U6 | SN74HC595 | 296-1600-5-ND | - |
| N1, N2, N3, N4 | IN-12A tube sockets | - | - |
